We manage principle of quality and design established of the company and always do our best to satisfy potential needs of our customers. We will continue to respond to customers’ request with Airnest developed products Our vision is to provide the Indian industry with the world’s most advanced and latest technologies for their pumping needs and with the prime objective.

Widely used in Solvents, Slurry Transfer, Barrels, Acidic Material, High Viscous Liquids, Abrasive Media, Transfer and loading/unloading HCL, Sulphuric acid, Caustic liquid, Water treatment, Corrosive Gasses, etc . .

Maximum Flowrate Range          : up to 880 LPM

Maximum Pressure                        : up to 7 bar

Design Pressure                              : 10 bar

Maximum Head                               : up to 68 meter

Temperature                                    : up to  -15⁰C to +350⁰ C

Material of Construction              : Stainless Steel-304/L, Stainless Steel-316/L, Aluminum, Polypropylene, PVDF

• Self Priming Capability.
• Continuously adjustable via controllable air volumes.
• Simple Startup.
• Low Maintenance.
• Easy to operate.
• Gentle displacement pumping.
• Self-adjusting when the medium changes.
• Resistant to dry running and runs smoothly with solid.
• No Shaft Seals.
• No drives or rotating parts in the pumped medium.
• Current-less drive via compressed aor.
• This pump are able to run dry without the need for oil expensive high quality lubricants.

• Certificate of Incorporation (COI)
• Ministry of Commerce and Industry & Directorate General of Foreign Trade (IEC)
• Ministry of Micro, Small and Medium Enterprises Certified (MSME)
• Occupational Health & Safety Management System standard : ISO 45001:2018
• Quality Management System standard : ISO 9001:2015
• Environmental Management System standard : ISO 14001:2015
• Egyptian Accreditation Council Certified (EGAC)
• International Accreditation Forum Certified (IAF)

Airnest warrants that pumps, accessories and parts manufactured or supplied by it to be free from manufacturing defects in material and workmanship for a period of two (2) years.

• All expenses incurred in collecting the units or parts there of from the Authorized Service Centre of AIRNEST INTERNATIONAL PVT. LTD. as well as expenses incurred in connection with deputing of service personnel / technicians towards to and for travel conveyance and other incidentals , will be borne by the customer.
• Warranty on mentioned material of construction and performance only.
• When handling corrosive chemicals, slurry, highly viscous, It is always advisable to flush the pump with water after each use and especially when it will remain Idle for an extended period.
• The warranty extended there in is in lieu of all implied conditions and warranties under the law and is confined to the repair or replacement of defective parts and does not cover any consequential or resulting liability, damage or loss arising from such defects. Furthermore, the warranty in no case, shall extend to the payment or any monetary consideration whatsoever, of the replacement or return of the product as a
• Suitability for the applicant should be determined by actual use and is the full responsibility of the customer.

Warranty shall not be applicable : 

• The product is not purchased from an Authorized Airnest sales dealer.
• The product purchased is not used according to instructions given in the INSTRUCTION MANUAL, as determined by the authorized service center / company personnel.
• If damage occurs due to improper installation & commissioning, and accessories.
• Service and/or maintenance is not undertaken in strict accordance with the instructions.
• Defects caused by improper use, as determined by the Authorized Service Center / Company personnel.
• The original serial number is removed, obliterated or altered from the product.
• Necessary repairs are not undertaken by our personnel or are undertaken without our prior written permission.
• The products supplied have been used amateurishly, carelessly, improperly and/or negligently.
• For failures due to improper shutdown, mishandling, unbalance load, negligence, external short circuit, wrong signal from External AMF /Remote panel, wrong synchronization, alteration of specification, accident and natural calamities etc.
• Modification or alterations of any by the purchaser or unauthorized personnel, as determined by the company personnel.
• Any loss or damage either direct or consequential, the effect of any accident resulting from defective material, faulty workmanship or otherwise.
• Rotating Parts & Electric Fault Warranty not providing.
• For any accidental damage, fire, collision, improper usage, tampering, customer abuse and external modifications / fabrications done by the end-customer or OEM and in force majeure. Force Majeure events include floods, earthquakes, accidents, natural disasters, act of God, war, trade embargo or the event that are not within the reasonable control of the parties.
• The products supplied are not used in accordance with their purpose.